Essex County Fire and Rescue Service - Procurement Portal


Buyer Profile

Return to Buyer Profile

< Previous Notices Next Notice >



UK-Basildon,: Installation of doors and windows and related components.

Section I: Contracting Authority
I.1)Name, Addresses and Contact Point(s):
Basildon Borough Council
The Basildon Centre,, St Martin's Square,, Basildon,, SS14 1DL, United Kingdom
Tel. +44 1268294413, Email: henry.okolieh@basildon.gov.uk, URL: https://www.basildon.gov.uk, URL: https://www.delta-esourcing.com/delta
Contact: Corporate Procurement Services, Attn: Henry Okolieh
Electronic Access URL: https://www.delta-esourcing.com/delta
Electronic Submission URL: https://www.delta-esourcing.com/delta

Further information can be obtained at: As Above
Specifications and additional documents: As Above
Tenders or requests to participate must be sent to: As Above

I.2)Type of the contracting authority:
Regional or local authority

I.3) Main activity:
General Public Services

I.4) Contract award on behalf of other contracting authorities:
The contracting authority is purchasing on behalf of other contracting authorities: No

Section II: Object Of The Contract: WORKS
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority: Supply and Installation of UPVC Windows and Doors Plus Associated Products (Including Fire Doors) for Basildon Borough Council Sheltered/General Needs Blocks
II.1.2)Type of contract and location of works, place of delivery or of performance: WORKS
Region Codes: UKH3 - Essex
II.1.3) Information about a public contract, a framework or a dynamic purchasing system:The notice involves a public contract

II.1.5)Short description of the contract or purchase:
Installation of doors and windows and related components. Basildon District was formed in 1974 and includes the towns of Basildon, Billericay and Wickford.
Basildon Borough Council (the Council) has a housing stock of circa 11,100 units spread over a geographical area of 42 square miles. Approximately 30% of these properties are of non-traditional construction.

Being a new town the stock is, in the main, post Second World War.

The Council¿s approach to window and door replacement is typical of social housing providers in that the Council:

¿ Replaces existing windows and doors, whether they be timber, uPVC, Crittall, aluminium etc that have come to the end of their life, with new uPVC products;
¿ Only replaces the above within the foot print of the domestic dwelling;
¿ Does not replace shed doors, even within the footprint of the dwelling;
¿ Does not replace garage, shed or other windows and doors to buildings separate from the domestic dwelling.

The approach also includes roofline works, generally comprising the renewal of fascias and soffits, and gutters and downpipes.

The Council has previously specified Permadoor domestic door sets to residential properties, and requires their continued usage.

The Council has the occasional requirement for the installation of aluminium faced communal entrance doors. However, the number is so small that these will be dealt with on under the contract on a case by case basis and percentage on-cost to materials and sub-contract labour.

In addition, The Council has a number of sheltered and general needs schemes with windows and doors located to communal parts.

There are circa 45 sheltered schemes, and circa 991 general needs blocks, the heights of which are shown below:

Number of Storeys 1 2 3 4 5 6 Grand Total
Number of Blocks 9 695 271 13 2 1 991


The Council has implemented a suited door entry system to communal entrance doors of both sheltered and general needs schemes, with circa 80% of doors being recipients of the system to date.

The Council has circa 25% leaseholders, who are naturally very interested in how Section 20 monies are spent. Whilst obligated to pay for windows and doors to communal parts, the terms of their lease generally makes them responsible for their own windows and doors.

The bulk of replacements will not require planning approval, but the Council does have a small percentage of its stock in conservation areas, and other areas, which will necessitate the requirement to obtain planning consent. For the sake of clarity, the contractor will be required to provide drawings and photographs where such consent is required. The Council will fill out the necessary planning paperwork, and pay fees levied by the Planning Department.

II.1.6)Common Procurement Vocabulary:
45421100 - Installation of doors and windows and related components.


II.1.7) Information about Government Procurement Agreement (GPA):
The contract is covered by the Government Procurement Agreement (GPA): No
II.1.8)Lots:
This contract is divided into lots: No
II.1.9)Information about variants:
Variants will be accepted: No

II.2)Quantity Or Scope Of The Contract
II.2.1)Total quantity or scope:
Not Provided

II.2.2)Options: Yes
If yes, description of these options: The Council wishes to procure the services of a contractor who can:

¿ EITHER manufacturer and also install UPVC windows OR an installer able to procure UPVC windows from a third party;
¿ AND who can also procure and install Permadoor products;
¿ AND who can undertake roofline works.

Bidders will need to satisfy the Council in terms of the products they propose to use based on an output specification which references relevant British Standards, Codes of Practice etc. To assist you in deciding whether to apply for this contract, the relevant excerpt from the tender specification is included as Appendix A - excerpt from specification.
II.2.3)Information about renewals:
This contract is subject to renewal: Yes

Number of possible renewals: 2

II.3)Duration Of The Contract Or Time-Limit For Completion
Duration in months: 60 (from the award of the contract)

Information About Lots

Section III: Legal, Economic, Financial And Technical Information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
Not Provided

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
Not Provided

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
Not Provided

III.1.4)Other particular conditions:
The performance of the contract is subject to particular conditions: Not Provided
III.2)Conditions For Participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers:
The Authority will apply all the offences listed in Article 45(1) of Directive 2004/18/EC (implemented as Regulation 23(1) of the Public Contract Regulations (PCR) 2006 in the UK) and all of the professional misconducts listed at Article 45(2) of Directive 2004/18/EC (see also Regulation 23(2) in the PCR 2006) to the decision of whether a Candidate is eligible to be invited to tender.

A full list of these criteria are at http://www.delta-esourcing.com/delta/project/reasonsForExclusion.html#pcr

Candidates will be required to answer these questions as part of the qualification process. For candidates who are registered overseas, you will need to declare if you have any offences/misconduct under your own countries laws, where these laws are equivalent to the Regulation 23 lists. Candidates who have been convicted of any of the offences under Article 45(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest for doing so. Candidates who are guilty of any of the offences, circumstances or misconduct under Article 45(2) may be excluded from being selected to bid at the discretion of the Authority.

Please refer to Pre Qualification Document (PQQ)
III.2.2)Economic and financial capacity
Economic and financial capacity - means of proof required:
(a) appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance;
(b) the presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established;
(c) a statement of the undertaking's overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last three financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available.

Information and formalities necessary for evaluating if requirements are met:
Please refer to Pre Qualification Document (PQQ)
Minimum Level(s) of standards possibly required:
The Council wishes to procure this services from contractors who are:

¿ EITHER manufacturer and also install UPVC windows OR an installer able to procure UPVC windows from a third party;
¿ AND who can also procure and install Permadoor products (and Fire Doors);
¿ AND who can undertake roofline works.

Bidders will need to satisfy the Council in terms of the products they propose to use based on an output specification which references relevant British Standards, Codes of Practice etc. To assist you in deciding whether to apply for this contract, the relevant excerpt from the tender specification is included as Appendix A - excerpt from specification.

III.2.3)Technical capacity
Technical capacity - means of proof required
(a) a list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct;
(b) a list of the principal deliveries effected or the main services provided in the past three years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: - where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, - where the recipient was a private purchaser, by the purchaser's certification or, failing this, simply by a declaration by the economic operator;
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator's undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(d) a description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking's study and research facilities;
(e) where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body's agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(f) the educational and professional qualifications of the service provider or contractor and/or those of the undertaking's managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work;
(g) for public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract;
(h) a statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last three years;
(i) a statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract;
(j) an indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) with regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.

Information and formalities necessary for evaluating if requirements are met:
Please refer to Pre Qualification Document (PQQ)
III.2.4)Information about reserved contracts: Not Provided
Section IV: Procedure
IV.1)Type Of Procedure
IV.1.1)Type of procedure: Open

IV.2)Award Criteria
IV.2.1)Award criteria:
The most economically advantageous tender in terms of
The criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction:
An electronic auction will be used: No

IV.3)Administrative Information
IV.3.1)File reference number attributed by the contracting authority: CP - 2012 - 0095
IV.3.2)Previous publication(s) concerning the same contract: No

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document:

Date: 01/11/2013
Time-limit for receipt of requests for documents or for accessing documents: 12:00
Payable documents: No

IV.3.4)Time-limit for receipt of tenders or requests to participate
Date: 16/12/2013
Time: 12:00
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up: English

IV.3.7)Minimum time frame during which the tenderer must maintain the tender
Duration in days: 205

IV.3.8)Conditions for opening tenders
Date: 16/12/2013
Time: 14:00
Place:
Corporate Procurement Office, Basildon Borough Council
Persons authorised to be present at the opening of tenders: Yes
Procurement Officer


Section VI: Complementary Information

VI.1)This Is A Recurrent Procurement: No
VI.2)Information about European Union funds:
The contract is related to a project and/or programme financed by European Union funds: No
VI.3)Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://www.delta-esourcing.com/tenders/UK-UK-Basildon%2C:-Installation-of-doors-and-windows-and-related-components./7DJ8HQ3Q59

To respond to this opportunity, please click here:
https://www.delta-esourcing.com/respond/7DJ8HQ3Q59
GO-20131031-PRO-5235473 TKR-20131031-PRO-5235472

VI.4)Procedures For Appeal
VI.4.1)Body responsible for appeal procedures:
Not Provided

VI.4.2)Lodging of appeals: Not Provided

VI.4.3)Service from which information about the lodging of appeals may be obtained:
Not Provided

VI.5) Date Of Dispatch Of This Notice: 31/10/2013

ANNEX A


< Previous Notices Next Notice >



Return to Buyer Profile